Help with my Power Functions train
Hopefully these steps will get your LEGO® Power Functions train back on track!
- Check the batteries in your battery box and remote: The green light on your battery box should come on when you press the power button and the green light on the remote should turn on when you press the buttons on it. If one of them doesn’t light up, try putting in new batteries. We recommend using alkaline batteries and not mixing brands.
- Check your plugs: Disconnect the wires that go from the motor to the receiver and from the receiver to the battery box. Hook them back up again. It’s possible something might not have been connected right.
- Check the remote and receiver: Make sure the channels on the remote and receiver are the same. The green light on the receiver should flicker when you press buttons on the remote. This lets you know that it’s receiving the signal.
- Check your motor: Connect the motor directly to the battery box and turn the battery box on.
If you’re still having problems after following these steps, get in touch with us. We’ll be more than happy to help you!