Napájaj a ovládaj senzory a motory Powered Up pomocou 88009 Centra od LEGO® Powered Up.
- Tento hračkársky robot obsahuje centrum s 2 vstupnými/výstupnými portami, pripájací kábel a prípojný bod pre komponenty od LEGO® Powered Up.
- Pripoj sa cez Bluetooth® z aplikácie LEGO® Powered Up.
- Vyžaduje si batérie (nie sú súčasťou balenia). Typ a množstvo sú uvedené na obale.
- Na všetky objednávky tovaru nad 55 € sa vzťahuje doručenie zadarmo so štandardným dodaním do 3 – 5 pracovných dní.
- Expresné doručenie je dostupné pri pokladnici.
- Objednávky jednotlivých súčiastok sa odosielajú oddelene od tovaru a ich spracovanie a odoslanie si vyžaduje dlhší čas.
- Neotvorený tovar možno vrátiť do 90 dní od doručenia objednávky a získať tak refundáciu plnej ceny.
- April 7th, 2020Average rating2out of 5 stars2.0They should have worked on it more.GraphicsGuy | 45-54Zakúpené pre: SelfI just got my first Powered Up train and, after just a few minutes, went online to order more PU parts in order to learn more and build some interesting things with PU, so my initial (first five minutes) experience was actually quite good. After a very short time I realized the first huge failing of this new system: the battery life is absolutely horrible. The press releases for Powered Up said battery life would be comparable to Power Functions, and it absolutely is not. You are lucky to get more than 25 minutes out of it, if the first two sets of batteries I've wasted are any indication (I've since ordered some rechargeable batteries). Frankly, for a company that touts its environmental record, it's unconscionable to have such miserable battery life, and it's a huge disappointment for a kid wanting to run their new train all day on Christmas. The second failing is that this system has been pushed as an educational system for kids to learn how to program, but they give ZERO documentation for using the app to create your own programs. I'm a professional computer programmer, and while I've figured out what nearly all the building blocks do, I find it hard to believe someone with no experience would be able to on their own - and there are still blocks that I don't understand. They apparently sent a "cheat sheet" PDF out to some, but I've seen it and it's incomplete - and says what the building blocks are, but not really how to use them. How many people with no programming experience understand what a variable is, let alone the difference between a local and global one? This system won't teach them that - not without documentation and examples. The system also doesn't allow any sort of feedback; there's nothing that lets your "program" display, for example, how fast your motor is running. The third is that switching apps on your phone (like you get a text message while playing) will actually disconnect and shut down the train motor, which is not the behavior I would expect or want. It might be OK for a default, but there's no way to change this, so there's no way to let your train run for a long time. This will also happen if the hub goes out of range. Additionally, PU is incompatible with Power Functions, despite the fact that PF motors only require power (which PU cables are obviously delivering); third parties are making cables that reportedly work (I have not tried one, as I'm trying to stick to "real" LEGO), while most incompatibility complaints seem to be met with "you never know what our engineers will come up with next!" Unlike PF motors (and 9V before that), when The LEGO Group decides to abandon PU for something new, the apps will eventually be out-dated, phone/tablet OSes will stop being compatible; I feel like the motors and hubs and controllers will become useless. You can use a 9V speed regulator from 30 years ago - how old is your oldest working mobile phone? Lastly, there is only mobile support. The apps don't work with Windows, and you can't program them using existing and commonly available languages. They should release libraries for various platforms, like .Net, if they really want people to find this programming ability useful in STEM education. All in all, I really feel like this product was rushed out the door without enough research and feedback, and once it was out they felt the need to push products using it, despite not really being ready. I've figured out how to do a few neat things with it (like a program that continuously runs the train around the track, stopping periodically at the station, pausing, and continuing on) but, while the promise is there, the delivery just doesn't seem there yet. Please, if you do nothing else, either fix battery life or stop saying it's comparable to PF.Herný zážitokAverage rating1out of 5 stars1.0NáročnosťAverage rating4out of 5 stars4.0Hodnota za peniazeAverage rating1out of 5 stars1.0Zážitok zo stavania: Advanced LEGO builderBoli tieto informácie užitočné?25Centrum
- April 2nd, 2020Average rating4out of 5 stars4.0Fair but expensive replacement to the PF batteryorganista014 | 45-54Odporučil(a) by som tento produkt priateľomI got this along with the new train motor (88011) to replace my Holiday and Harry Potter train's setup. So far I'm happy with the setup. On the plus side, the receiver is already built in so it gets rid of the IR receiver for a cleaner look, and remote in favor of the Powered Up phone app. Does not require line of sight to control but you will need a compatible device (phone, tablet,or the new Lego bluetooth remote) which needs to be on all the time to control. It has 2 ports but only port "A" can be used for the motor by the "train" app (port "B" can be controlled using the "Batman" app but can be weird -- download or review the Powered Up app to better understand what these mean). I use the "B" port with the color/distance sensor (88007) to experiment on some coding controls. Controls are responsive so far, but the app in its initial development stage is too basic. The app can control up to 4 of these hubs. On the minus side, this hub is limited in use to creations that don't use too much controls (like trains). You cannot daisy chain components like how the old motors and lights did -- you cannot control 2 motors simultaneously on a single channel. This "Powered Up" (PU) technology is not compatible with the older "Power Function" (PF) technology. Also, the ports don't have clips and components will easily slip out of this hub when pulled. Battery life seems to be shorter given that it also powers the Bluetooth radio receiver. A big bummer for me though, with the old one (PF) you can leave the train running when you turn off/toss away the remote, but with PU the train stops when the app turns off or moves away from range, so you can't just leave your train running in the background when you step away. This hub is more for the tech oriented kids and adults, but may not appeal to younger kids looking to have a simple motorized out-of-the-box fun with their builds. However, I do like how this reduces the parts needed to control my trains. This seems to have firmware capability so current limitations *may* be addressed in the future with firmware updates.Herný zážitokAverage rating4out of 5 stars4.0Hodnota za peniazeAverage rating3out of 5 stars3.0Zážitok zo stavania: Expert LEGO builderBoli tieto informácie užitočné?45Centrum
- April 7th, 2020Average rating1out of 5 stars1.0Limited options, shameful battery lifeHRBuildNStuf | 45-54Zakúpené pre: SelfWhere to start? To access the battery chamber you have to unscrew two small screws. This worries me because you have to put in fresh batteries like every few hours. The appetite this hub has for batteries is enough to make this simply unusable. Don't make the mistake of using any non-recharchable batteries even if you're excited to put things in action for the very first time. You're giving those batteries an hour-long death sentence.) At any rate, those screws are going to wear out, never mind they're inconvenient. It's LEGO! It should secure shut with studs or snaps! Especially considering how frequently you'll have to change batteries! Next up is the huge limitation that you only get two accessories. No more daisy-chaining to bedazzle your project with lights. I'm building a train and if it uses the older PF which they're trying to phase out, I can have two motors and several lights off of one battery box AND I won't have to change the batteries in an hour. With the new Powered UP components, I have to choose between two motors OR a motor and one light. I can't even daisy-chain more lights to light up the trailing cars! Lastly we have the controls. If you're using one of the linear motors (rather than the train motor), and you have the remote control unit, you get binary output from the motor (it's either on or it's off) with no modulation (no regulating the speed). Also, you have to sit there and hold the button down, the moment you lift your finger the motor will stop. So it sucks for trains. You can get more fine control if you download the app to use, but be prepared to spend quite a long time just trying to figure out how to do the most basic things in the app with little success. There's no documentation and very little guidance on the Internet to help you utilize the software. I'm an IT Engineer with programming experience, I figure software out for a living, and this one is a challenge! The programming itself is simple enough, but the UI around the actual programming is as clear as mud. If you try the "controller" option which should simply just simulate a controller, well one of the two choices won't actually do anything so even that wasn't 100% "plug and play" (I had the misfortune of trying the one that won't do anything first). Even the cords seem like a poor choice, carrying on from the ribbon cables of the PF world but seemingly even more rigid this time. So if you're building a project with any articulation, the PU component cables are REALLY working against you. By being flat ribbon cables they'll only flex in one plane, and they're rigid enough that they're more likely to move your project's joints than your joints are likely to move them. They pose a significant engineering challenge (and restriction) for my train. The one positive (and reason I tried the new components) is not needing the IR module (which means I don't have to figure out how to build it into my project, plus it means fewer cords). But despite that huge gain, I'm at a loss to compensate for all of the other shortcomings. The battery life is really the big one. Even if I use rechargables, having to change them so frequently (basically every time you want to run your devices) is just not going to cut it. Well oh and I want two motors plus lights. Can't have it with Powered Up, can have it with Power Functions. Why is that, LEGO? Why have you added that limitation? At any rate, I'm pretty dissatisfied with their design choices and their execution of the new PU components and pretty sure I'll be returning everything and going back to PF (while I still can).Herný zážitokAverage rating1out of 5 stars1.0NáročnosťAverage rating5out of 5 stars5.0Hodnota za peniazeAverage rating1out of 5 stars1.0Čas stavania: 10 MinútyBoli tieto informácie užitočné?15Centrum
- April 8th, 2020Average rating2out of 5 stars2.0Yet another incompatible systemcbnaum | 45-54Zakúpené pre: SelfWe have gone for the 9V system, to the power functions system, with a side detour to the mindstorm systems, and now to the power-up system. And largely, these systems do not work together. I dislike the power up system for several reasons. There are no extension cables, you cannot build large models with it. The connectors are completely unique to LEGO, you cannot make your own cables or buy them from third parties. There are no rechargeable battery pack meaning you may have to take a model apart to replace the batteries. These elements existed under the power function system, but not under this new system. And this new system really does not do anything that the power functions system could not have done. The Bluetooth controller is cool, it is fun to be able to control your models with a mobile device, but this could have easily been added to the power functions system without breaking compatibility (3rd parties have been offering Bluetooth controller for power functions for a while.) Bottom line: different, incompatible, more expensive, fewer accessories, less flexibility... I do not see much here to like.14. októbra 2019Keith, Customer ServiceHi there, thanks for your feedback. While LEGO play will always be rooted in the brick, it's important to us that we embrace new technologies so today's children can continue to learn and enjoy the latest play experiences. Powered UP offers several advantages not possible with the old Power Functions system, including smartphone and tablet based control, integration of the "battery box" and "receiver" into a single unit, and much greater proximity via bluetooth. While rechargeable battery packs and extension cables aren't available for powered UP just yet, you never know what our designers will come up with next as we continue to expand platform!Herný zážitokAverage rating2out of 5 stars2.0NáročnosťAverage rating1out of 5 stars1.0Hodnota za peniazeAverage rating2out of 5 stars2.0Zážitok zo stavania: Expert LEGO builderBoli tieto informácie užitočné?25Centrum