Kleur- en afstandssensor

Recensies

• February 4th, 2020
  Average rating5out of 5 stars

  5.0
  Sensor works great, interface a challenge
  CrouchEndDad | 45-54
  Ik zou dit aanbevelen aan vrienden!
  Bought this (as many do) to make an automatic train (that will stop and wait at stations etc), by placing coloured tiles on the track bed. It is easy to fit to the underside of the passenger train (60197), through the square hold in the baseplate with just a single bracket and the sensor sitting at the same height as the bottom of the bogie. Once I fought the iPad app into submission, the colour sensor (I haven't used the distance feature) worked with a range of coloured tiles, eg red (stop & wait), green (speed up) and yellow (slow down). I had the track on a black tablecloth and have not, so far had any issues with unexpected colour detection. The coding was something of a challenge as you have to handle the idiosyncracies of the sensor with very little guidance (eg the polling frequency of the sensor: once you have detected a colour and performed the action, put in a loop that only exits when that colour changes. Otherwise you can have multiple detections of the same colour leading to unexpected results). Also, in the Mindstorms coding you can have one block to handle multiple possibilities (ie a switch statement) … I haven't found this in the Powered Up interface, and instead have a succession of nested binary "if" blocks.

  Lees verder

  Bouwervaring: Ervaren LEGO bouwer
  Bruikbaar?
  0

  0
  55Kleur- en afstandssensor
• September 18th, 2020
  Average rating3out of 5 stars

  3.0
  Reset button?
  KnightInArmour | 14-18
  Ik zou dit aanbevelen aan vrienden!
  I bought this sensor to go with my LEGO Powered Up vending machine. It worked excellently, but my machine can feature more than just one gumball! A reset block on the app(if there is, ignore this review) is not featured, so even if I trigger the distance sensor again, it will not function. I have to reset my iPad again manually, which is slightly annoying. The sensor also sometimes triggers when the coin has not passed through the machine, it just doesn’t sense the coin. Please add a reset block on the Powered Up app if there isn’t already, and please steady the sensor detection!

  Lees verder

  Bouwervaring: Gevorderde LEGO bouwer
  Bruikbaar?
  0

  0
  35Kleur- en afstandssensor
• April 29th, 2020
  Average rating3out of 5 stars

  3.0
  Useful for basic automation of trains, only basic
  Reynard | 25-34
  Ik zou dit aanbevelen aan vrienden!
  I played around with this sensor to automate my Lego Trains. It was pretty cool but the system has options (through the Powered Up App) to sense 9 colors (black, blue, green, yellow, red, white, purple, teal, and orange) as well no color. It really only senses 5 of these from what I can tell, none/black, green, yellow, red, and blue. The sensor has a light which is great 'cause if you put it under the trains (I put it in the new version of the cargo train by shifting backward the battery box) it won't have much light. It's really cool 'cause I can automate a lot of stuff with, but since it doesn't really sense the rest of the colors (even when changing the color of the sensor's light) it can't be used as precisely as I'd like. Still, it's not very expensive and the basic hub comes with enough ports for a train motor and a sensor so you don't need more equipment than the sensor to upgrade your setup.

  Lees verder

  

  Antwoord van de LEGO® winkel

  8 mei 2020

  Emily, Customer Service

  We're sorry you had some trouble getting your sensor to work with some colors. We'd be happy to help with some troubleshooting. Get in touch at LEGO.build/Service-BV.

  Bouwervaring: Ervaren LEGO bouwer
  Bruikbaar?
  0

  0
  35Kleur- en afstandssensor
• May 10th, 2019
  Average rating3out of 5 stars

  3.0
  Distance sensor works great, color sensor iffy
  organista014 | 45-54
  Ik zou dit aanbevelen aan vrienden!
  I'm using this with the Powered Up hub (88009) to control forward and backward movement of my trains and so far it has been buggy, a combination of both software and hardware issues. The distance sensor function works very well, and you can control the distance of the sensor from an approaching object to kick off a trigger. However, the color sensor has sensitivity issues and is a hit-and-miss (i would say 75% hit 25% miss). It also suffers from sensing a color that is not there. I placed it to read color tiles on a train track and it registers a trigger even if there is no color there. And in order to read a color, the sensor has to be within millimeters of the colored object. Also, not sure if it is with the Powered Up software, but after a few passes of the sensor with colors, it will ignore subsequent color reads and will stop working. I would recommend this for distance sensor control but it needs major improvement with the range and sensitivity of the color sensor. Eventually I would like to make this work on a linear train track on my holiday village to make the train move back and forth controlled by colored tiles.

  Lees verder

  

  Antwoord van de LEGO® winkel

  15 mei 2019

  Callie, Customer Service

  Thank you so much for your review! I'm sorry to hear you're having some issues with the Color Sensor. For tip top performance, make sure the sensor is tested in an area with bright and steady lighting while using bricks with varied color values. Black, Brown, Red, Blue and Yellow work the best! Still having trouble tracking the colors? Get in touch with our friendly giving us a shout at LEGO.com/service for some support for your sensor.

  Bouwervaring: Expert LEGO bouwer
  Bruikbaar?
  0

  0
  35Kleur- en afstandssensor