NEMOKAMAS rinkinys „Patobulintas automobilis“ perkant prekių už daugiau nei 85 €.*Apsipirkti dabar

NEMOKAMAS rinkinys „Patobulintas automobilis“ perkant prekių už daugiau nei 85 €.*Apsipirkti dabar

Item 1 of 1
Item 1 of 1
LEGO®88007Powered UPPowered UP

Spalvų ir atstumo jutiklis

Spalvų ir atstumo jutiklis45.
Average rating4out of 5 stars

Gauk šį patobulintą automobilį „Mėlynasis įniršis“ NEMOKAMAI, pirkdamas prekių už daugiau nei 85 €.*

Sužinokite daugiau
Price14,99 €

Galima įsigyti dabar

Limitas 20
Raskite daugiau panašių produktų:
7+Amžiaus grupės
1Dalys
112
VIP taškai
880078800788007Prekė

Prijunk LEGO® Powered Up 88007 spalvų ir atstumo jutiklį prie 88006 judesio stebulės arba 88009 stebulės. Šis LEGO jutiklis atpažįsta spalvas bei judesį ir suteikia tavo LEGO pastatams bei žaisliniams robotams interaktyvumo.

  • Su jutikliu, laidu ir jungtimi LEGO® Powered Up dalims.
  • Šis priedas žaisliniams robotams atpažįsta 6 spalvas ir objektus 5–10 cm atstumu.
Konstravimo instrukcijos
Spalvų ir atstumo jutiklis
  • Nemokamas įprastas pristatymas per 4–6 darbo dienas užsakant prekių už daugiau nei 55 €!
  • Skubų pristatymą galima pasirinkti apmokėjimo metu.
  • Užsakytos pritaikytos detalės siunčiamos ne kartu su prekėmis, todėl užsakymui apdoroti ir išsiųsti reikia daugiau laiko.
  • Neatidarytas prekes galima grąžinti ir atgauti visus pinigus per 180 dienų nuo užsakymo gavimo.
Taikomos tam tikros išimtys. Daugiau informacijos pateikiama mūsų puslapyje „Pristatymas ir grąžinimas“.
Bendras įvertinimasAverage rating3.8out of 5 stars
(5 Atsiliepimai)
100% Rekomenduotų šį produktą

Įvertinimas

Bendroji patirtis

Žaidimo patirtisAverage rating3out of 5 stars
Sudėtingumo lygisAverage rating4out of 5 stars
Geras kainos ir kokybės santykisAverage rating3.4out of 5 stars
Atkreipkite dėmesį, kad kartu su peržiūra pateikus naudingumo įvertinimą, jūsų IP adresas išsaugomas ir laikomas mūsų trečiosios šalies paslaugų tiekėjo. Tai atliekama todėl, kad iš vieno IP adreso nebūtų pateikiama keletas įrašų. Norėdami sužinoti, kaip valdyti savo asmeninius duomenis, žr. mūsų privatumo politiką<./a>.

Atsiliepimai

  • September 18th, 2020
    Average rating3out of 5 stars
    Reset button?
    Rekomenduočiau draugui!
    Įsigyta už: Self
    I bought this sensor to go with my LEGO Powered Up vending machine. It worked excellently, but my machine can feature more than just one gumball! A reset block on the app(if there is, ignore this review) is not featured, so even if I trigger the distance sensor again, it will not function. I have to reset my iPad again manually, which is slightly annoying. The sensor also sometimes triggers when the coin has not passed through the machine, it just doesn’t sense the coin. Please add a reset block on the Powered Up app if there isn’t already, and please steady the sensor detection!
    Žaidimo patirtisAverage rating3out of 5 stars
    Sudėtingumo lygisAverage rating4out of 5 stars
    Geras kainos ir kokybės santykisAverage rating2out of 5 stars
    Konstravimo laikas: 1 Val.
    Konstravimo patirtis: Intermediate LEGO builder
    Ar padėjo?
    35Spalvų ir atstumo jutiklis
  • February 4th, 2020
    Average rating5out of 5 stars
    Sensor works great, interface a challenge
    | 45-54
    Rekomenduočiau draugui!
    Įsigyta už: Son
    Bought this (as many do) to make an automatic train (that will stop and wait at stations etc), by placing coloured tiles on the track bed. It is easy to fit to the underside of the passenger train (60197), through the square hold in the baseplate with just a single bracket and the sensor sitting at the same height as the bottom of the bogie. Once I fought the iPad app into submission, the colour sensor (I haven't used the distance feature) worked with a range of coloured tiles, eg red (stop & wait), green (speed up) and yellow (slow down). I had the track on a black tablecloth and have not, so far had any issues with unexpected colour detection. The coding was something of a challenge as you have to handle the idiosyncracies of the sensor with very little guidance (eg the polling frequency of the sensor: once you have detected a colour and performed the action, put in a loop that only exits when that colour changes. Otherwise you can have multiple detections of the same colour leading to unexpected results). Also, in the Mindstorms coding you can have one block to handle multiple possibilities (ie a switch statement) … I haven't found this in the Powered Up interface, and instead have a succession of nested binary "if" blocks.
    Žaidimo patirtisAverage rating3out of 5 stars
    Sudėtingumo lygisAverage rating4out of 5 stars
    Geras kainos ir kokybės santykisAverage rating5out of 5 stars
    Konstravimo patirtis: Advanced LEGO builder
    Ar padėjo?
    55Spalvų ir atstumo jutiklis
  • May 10th, 2019
    Average rating3out of 5 stars
    Distance sensor works great, color sensor iffy
    | 45-54
    Rekomenduočiau draugui!
    I'm using this with the Powered Up hub (88009) to control forward and backward movement of my trains and so far it has been buggy, a combination of both software and hardware issues. The distance sensor function works very well, and you can control the distance of the sensor from an approaching object to kick off a trigger. However, the color sensor has sensitivity issues and is a hit-and-miss (i would say 75% hit 25% miss). It also suffers from sensing a color that is not there. I placed it to read color tiles on a train track and it registers a trigger even if there is no color there. And in order to read a color, the sensor has to be within millimeters of the colored object. Also, not sure if it is with the Powered Up software, but after a few passes of the sensor with colors, it will ignore subsequent color reads and will stop working. I would recommend this for distance sensor control but it needs major improvement with the range and sensitivity of the color sensor. Eventually I would like to make this work on a linear train track on my holiday village to make the train move back and forth controlled by colored tiles.
    Lego

    LEGO® internetinės parduotuvės atsakymas

    15 May 2019
    Callie, Customer Service
    Thank you so much for your review! I'm sorry to hear you're having some issues with the Color Sensor. For tip top performance, make sure the sensor is tested in an area with bright and steady lighting while using bricks with varied color values. Black, Brown, Red, Blue and Yellow work the best! Still having trouble tracking the colors? Get in touch with our friendly giving us a shout at LEGO.com/service for some support for your sensor.
    Žaidimo patirtisAverage rating3out of 5 stars
    Geras kainos ir kokybės santykisAverage rating3out of 5 stars
    Konstravimo patirtis: Expert LEGO builder
    Ar padėjo?
    35Spalvų ir atstumo jutiklis
  • June 28th, 2019
    Average rating5out of 5 stars
    Works 100% with the right colours
    | 35-44
    Rekomenduočiau draugui!
    Įsigyta už: Self
    Note : Powered Up app needed to use. I have purchased 2 of these from Lego.com and I have fitted one of them to my passenger train 60197, it's in the middle of the loco pointing down at the track, set roughly 5-10mm from the track sleepers. I had to experiment with different colours, red and white were good but yellow was also detected when track went over my laminate flooring. > I use red 4x2 plates on my track in stations stop the train e.g. to load/unload passengers. > I use white 4x2 plates on my track to call sounds and change speed, e.g. horn at tunnel entrance or slow down for a curve With my room/flooring/lighting, all plates are recognised 100% of the time, at hi and low speed, when using red and white plates. I use studded plates as i think the smooth ones are too reflective/shiny. Andy.
    Žaidimo patirtisAverage rating4out of 5 stars
    Geras kainos ir kokybės santykisAverage rating3out of 5 stars
    Konstravimo laikas: 5 minučių
    Konstravimo patirtis: Intermediate LEGO builder
    Ar padėjo?
    55Spalvų ir atstumo jutiklis
...0000000000