VIP-medlemmer: Få dobbelt point fra 12.4. til 20.4.Til butikken

VIP-medlemmer: Få dobbelt point fra 12.4. til 20.4.Til butikken

Item 1 of 1
Item 1 of 1
LEGO®88005Powered UPPowered UP

Lys

Average rating4out of 5 stars

Optjen dobbelt VIP-point på køb fra 12.4. til 20.4.

Er du Ikke VIP?
Price80,00 kr.

Tilgængelig nu

Grænse 20
Find flere produkter som dette:
7+Alder
1Dele
80
VIP-point
880058800588005Vare

Forbind LEGO® Powered Up 88005 Lys med LEGO modeller ved hjælpl af Powered Up-hubben – såsom LEGO City 60197 Passagertog – og sæt lys på dine kreationer!

  • Omfatter 2 LED-lys, forbindelsesledning og tilslutningspunkt til LEGO® Powered Up-komponenter.
Byggevejledninger
Lys
  • Standardforsendelse tager 2-4 hverdage og er gratis ved bestillinger over 400 kr.
  • Der er mulighed for at vælge ekspresforsendelse ved betaling i kassen.
  • Tilpassede bestillinger på klodser og elementer sendes ikke sammen med andre varer, da de kræver ekstra tid til behandling og forsendelse.
  • Uåbnede varer kan returneres med fuld refusion inden for 90 dage, fra du modtager din bestilling.
Der er dog visse undtagelser. Få mere at vide på siden Levering og returnering.
Samlet bedømmelseAverage rating4out of 5 stars
(7 Anmeldelser)
86% af anmelderne vil anbefale dette produkt.

Bedømmelse

Samlet erfaring

Vær opmærksom på, at hvis du stemmer på, hvor nyttig en anmeldelse er, indsamles og gemmes din IP-adresse af en betroet tredjepartsleverandør. Dette sker udelukkende med det formål at forhindre, at der stemmes flere gange fra den samme IP-adresse. Du kan læse mere om, hvordan du kontrollerer dine persondata, i vores Politik om beskyttelse af personlige oplysninger.

Anmeldelser

  • June 28th, 2019
    Average rating4out of 5 stars
    These work and look good in the passenger train
    | 35-44
    Jeg vil anbefale denne til en ven!
    I purchased 3 sets of these from Lego.com to light my passenger train and my emerald night. I have fitted one set to the front of my passenger train 60197 very easily and the brightness is controllable from 0 to 10 using port/channel B. However, I have since disconnected them since I need port B for the colour sensor :-( sad face Andy.
    Byggeerfaring: Mellemgod LEGO bygger
    Var dette nyttigt?
    45Lys
  • August 31st, 2019
    Average rating3out of 5 stars
    I hoped for better but I still hope
    | 45-54
    Jeg vil anbefale denne til en ven!
    In single use the light works well enough, either in the passenger train set (though it has difficulty in the cargo train) or in an alternative train such as a monorail. There are 10 levels of brightness compared to 7 for Power Functions. You can make a flashing light by putting a 24mm pulley in front of each LED and rotating the pulleys, with round plates 1x1 in the holes, using a pattern of translucent and opaque colours. That can be fun in the dark. This light brick duplicates the functionality of the previous Power Functions light brick 8870 but is more limited because only one light brick can be plugged into one port of a Powered-Up hub at a time. I made a lantern with 12 Power Functions light bricks 8870 but I could not do the same with this one because the PU plugs cannot be stacked. If you want to light both ends of a train locomotive then it will cost you another hub once port A drives the motor and port B drives the front light. This simple light function is one area where the new Powered-Up system is lacking; it does complexity but struggles to duplicate the basic simple stuff that introduces young people to extra functionality of the LEGO system. I was disappointed that this light brick is 64% more expensive than the Power Functions light brick for the same functionality and extra limitations. The two extra wire cores serve to identify the light brick to the hub when it is plugged in, but otherwise it costs more for no benefit to the user. For lighting a whole LEGO City, compare this light brick with the cost of 100 white LED Christmas lights; about the same at normal price but half the cost of this light brick in a post-Christmas sale. With the new Powered-Up hub functionality and 6 wires rather than 4 I would expect the hub to be able to flash the lights alternately for a police car, or set them in fixed alternation for a railway signal (like 12V signal 7860), or have them flash together. I am tempted to use this light brick as the easiest way to break into the electrical system, since I can understand the protocols to make lights switch with the direction of the train and stay on when the train stops. I wonder whether such functions will be developed in the Powered-Up system eventually? A scale model train locomotive needs to be able to use 2 train motors and 6 light bricks to do marker lights, tail lights, headlight and cab illumination. This has to run from a single Powered-Up hub with a LiPo battery. There is much work to do to bring the light functions up to the standard of the new motors. So I would recommend this item as a single light for the train, or as an entry point for experimentation with the electronics of the Powered-Up system. Any recommendation in multiple is on hold pending development of the Powered-Up system. For multiple lights, the Power Functions light brick 8870 is better; get them while you can.
    Byggeerfaring: Ekspert LEGO bygger
    Var dette nyttigt?
    35Lys
  • November 12th, 2018
    Average rating4out of 5 stars
    Powered up Train Lights
    | 45-54
    Jeg vil anbefale denne til en ven!
    Very easy to fit works off the B channel of the remote with 10 levels of brightness by using the + - key.
    Var dette nyttigt?
    45Lys
...0000000000